Custom stainless steel panels, railings and benches supports at Middlebury College Proctor Hall
Custom trusses for the Burlington International Airport. Trusses were
fabricated at our shop in Bristol, transported and then set with our 14
Custom structural steel work on the 14,000 sq foot mansion on the hill
in Stowe Vermont. Steel was fabricated at our shop in Bristol. After
fabrication was completed Steel was loaded on our tractor trailers to be transported to job site on arrival our 70 ton crane set the custom steel beams into place.
Custom frame and spiral stairs made for the old Audet farm silo in Cornwall. The new owner has turned the silo in to a guest house. (_a beautiful guest house_) We first made a frame for the building that is housing the spiral stairs. The frame was set and secured to the outside of the silo with our 33 ton crane. We then set to work on building the custom 40' tall spiral stairs. We fabricated two cradles with small wheels and locks for the 10" center pipe of the stairs, this way we could fabricate the stairs horizontally and spin the center pipe as needed to fabricate stair treads and railings on the stairs . After the stairs were completed we loaded the fully fabricated stairs still in it's cradle onto one of our tractor trailers to be transported it's new home in Cornwall. Upon arrival our 70 ton crane was ready and waiting to set the stairs down into the frame that was starting to be enclosed and framed in for windows by the contractor. After the stairs were secured we fabricated three platforms that attached the stairs to each level of the silo we then used our 33 ton crane to set the roof on the building enclosing the spiral stair case. After the inside levels of the guest house were completed we fabricated our last phase of this project a custom balcony that was set into place with our 24 ton terex boom truck. It was a pleasure and an honor of Brown's Certified Welding Inc. to be able to take part in such a unique and beautiful project.
Cincinnati Shear 1/2" x 12' capacity
Cincinnati Break 300 ton capacity
42 and 96 ton iron worker shears 6" x 6"
1/2" punches holes up to 1 1/4"
3/8" plate roller x 8'
Custom made aircraft engine stand for specific aircraft engines, getting ready for shipment to Baghdad International Airport Baghdad Iraq
for it's first job of many. Drawing supplied by Chrison's Aerospace LLC.